|
接著1樓 if !OpChoice!==11 ( echo list disk>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt set /a CountDisk=0 set /a CountPart=0 set NumDisk=0 set bVldNum=n set NumVol=0 set /a a=0 set /a CountWim=0 set /a NumWimSource=0 set /a NumDskG=0 set /a NumPart=0 set bBK=y echo list disk>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt>%temp%\Out_DiskPart.txt find /i "磁盤" %temp%\Out_DiskPart.txt>%temp%\Out_tmp.txt for /f "skip=2 tokens=2 delims= " %%i in (%temp%\Out_tmp.txt) do (set /a CountDisk=%%i) for /l %%i in (1,1,5) do ( if !bVldNum!==n (set /p NumDisk=請輸入要安裝或備份系統的目標磁盤編號，從0起編，默認第0塊磁盤----) for /l %%j in (0,1,!CountDisk!) do ( if !NumDisk!==%%j set bVldNum=y ) ) if !bVldNum!==n (echo 磁盤編號5次都輸錯，算了退出吧！&&exit) ::Ghost認為磁盤從1開始起編！ set /a NumDskG=!NumDisk!+1 set /p bBK=請問是進行備份嗎，如恢復輸入n,默認是備份y，直接回車---- echo select disk !NumDisk!>%temp%\DiskPart.txt echo list part>>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt ::準備指定安裝或備份分區 set /p NumPart=你選擇在磁盤^<!NumDisk!^>上安裝或備份系統，請輸入分區序號---- if !bBK!==y ( echo list vol>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt set bHvLabSr=n for /l %%i in (1,1,5) do ( if !bHvLabSr!==n ( set /p LabelSr=請輸入系統備份gho文件的放置盤符,直接回車---- if not exist !LabelSr!: echo 你輸入的盤符是什么東西，根本不存在嗎？ if exist !LabelSr!: set bHvLabSr=y ) ) if not exist !LabelSr!:\backup md !LabelSr!:\backup set NameBack=bk_Mby set /p NameBack=請輸入要備份文件名字，默認名字bk_Mby，直接回車---- %~dp0ghost -clone,mode=pdump,src=!NumDskG!:!NumPart!,dst=!LabelSr!:\backup\!NameBack!.gho /z9 /sure goto End ) if not !bBK!==y ( echo list vol>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt ::指定要安裝分區，請看卷標信息。 set bHvSYS=n for /l %%i in (1,1,5) do ( if !bHvSYS!==n ( set /p LabSYS=請輸入要安裝系統分區盤符,就是那個序號對應的盤符，然后回車---- if not exist !LabSYS!: echo 你輸入的盤符是什么東西，根本不存在嗎？ if exist !LabSYS!: set bHvSYS=y ) ) ::指定EFI/MSR分區盤符，請看卷標信息。 set bHvSYS=n for /l %%i in (1,1,5) do ( if !bHvSYS!==n ( set /p Label_ESP=請輸入EFI/MSR分區盤符,不帶冒號，然后回車---- if not exist !Label_ESP!: echo 你輸入的盤符是什么東西，根本不存在嗎？ if exist !Label_ESP!: set bHvSYS=y ) ) set bNdCpyFil=n set /p bNdCpyFil=請問需要從U盤復制gho文件嗎，如需要輸入y,默認不要n，直接回車---- if !bNdCpyFil!==y ( ::現在準備把系統備份gho文件復制到本地卷中，請看卷標信息。 ::指定系統備份gho文件文件本地磁盤放置分區。 set bHvLabSr=n for /l %%i in (1,1,5) do ( if !bHvLabSr!==n ( set /p LabelSr=請輸入要放置系統備份gho文件的盤符,直接回車---- if not exist !LabelSr!: echo 你輸入的盤符是什么東西，根本不存在嗎？ if exist !LabelSr!: set bHvLabSr=y ) ) if not exist !LabelSr!:\backup md !LabelSr!:\backup ::準備源系統備份gho文件與索引序號。 set bHvLSr=n for /l %%i in (1,1,5) do ( if !bHvLSr!==n ( set /p LPartU=請輸入系統備份gho文件所在U盤盤符，不帶冒號---- if not exist !LPartU!: echo 這個盤符根本就沒有使用了，你不要搞笑好吧 if exist !LPartU!: set bHvLSr=y ) ) dir !LPartU!:\*.gho /b /s >%temp%\fSeek.txt echo 查找到!LPartU!分區下所有g(shù)ho文件如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1&&echo 系統備份：!a! %%i) set /a CountWim=!a! if !a!==0 echo 該分區無系統備份文件,退出重來吧！&&goto End set /p NumWimSource=請輸入gho文件序號，我不檢測無效序號，不帶冒號---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumWimSource!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效gho文件序號,退出重來吧！&&goto End set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1 if !NumWimSource!==!a! copy %%i !LabelSr!:\backup\ ) echo gho文件已拷貝到本地磁盤,程序暫停，U盤可以拔出它用，然后繼續。 pause dir !LabelSr!:\*.gho /b /s >%temp%\fSeek.txt echo 查找到!LabelSr!分區下所有g(shù)ho文件如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1&&echo 系統gho：!a! %%i) set /a CountWim=!a! set /p NumWimSource=請輸入系統gho文件序號，我不檢測無效序號，不帶冒號---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumWimSource!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效系統gho文件序號,退出重來吧！&&goto End set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1 if !NumWimSource!==!a! ( %~dp0ghost -clone,mode=pload,src=%%i:1,dst=!NumDskG!:!NumPart! /sure ) ) ) if not !bNdCpyFil!==y ( set bHvLabSr=n for /l %%i in (1,1,5) do ( if !bHvLabSr!==n ( set /p LabelSr=請輸入有系統備份gho文件的盤符,直接回車---- if not exist !LabelSr!: echo 你輸入的盤符是什么東西，根本不存在嗎？ if exist !LabelSr!: set bHvLabSr=y ) ) dir !LabelSr!:\*.gho /b /s >%temp%\fSeek.txt echo 查找到!LabelSr!分區下所有g(shù)ho文件如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1&&echo 系統gho：!a! %%i) set /a CountWim=!a! set /p NumWimSource=請輸入系統gho文件序號，我不檢測無效序號，不帶冒號---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumWimSource!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效系統gho文件序號,退出重來吧！&&goto End set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1 if !NumWimSource!==!a! ( %~dp0ghost -clone,mode=pload,src=%%i:1,dst=!NumDskG!:!NumPart! /sure ) ) ) if !bPart_GPT!==y %windir%\system32\bcdboot !LabSYS!:\windows /s !Label_ESP!: /f uefi /l zh-cn if not !bPart_GPT!==y ( if exist !LabSYS!:\ntldr %windir%\system32\bootsect.exe /nt52 !Label_ESP!: /force /mbr if not exist !LabSYS!:\ntldr %windir%\system32\bootsect.exe /nt60 !Label_ESP!: /force /mbr&&%windir%\system32\bcdboot !Label_SYS!:\windows /s !Label_ESP!: /f bios /l zh-cn ) ) goto End ) if !OpChoice!==12 ( set bVldNum=n set NumVol=0 set /a a=0 set NumSdi=1 set /a CountWim=0 set NumWimSource=1 set bHvFilePE=n echo ------------------------------------------------------------------------------ echo. echo 將PE安裝在EFI分區或者M(jìn)SR分區內，防止PE受損,沒有這種分區你就老外了。 echo. echo ------------------------------------------------------------------------------ echo PE放于指定盤根目錄下WinPE文件夾，設備文件Boot.sdi和啟動文件Boot.wim也固定。 set bIsUEFI=y set /p bIsUEFI=請問BIOS是否UEFI,默認是，不是請輸入小寫n---- set bHvLab=n set /p bHvLab=采用MBR但無MSR，或者M(jìn)BR中MSR分區/ESP分區如已有盤符，輸入y,其余直接回車---- if !bHvLab!==y ( set /p LabelEFI=請輸入ESP分區或MBR中MSR分區盤符或者M(jìn)BR無MSR分區時的系統盤符---- ) if not !bHvLab!==y ( ::給EFI或者M(jìn)SR分區分配盤符 set bHvSetESP=n for %%i in (z y x w v u t s r q p o n m) do ( if !bHvSetESP!==n ( if not exist %%i: set LabelEFI=%%i&&set bHvSetESP=y ) ) echo list vol>%temp%\DiskPart.txt echo exit>>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt set /p NumVolESP=請輸入GPT中ESP分區或MBR中MSR分區的卷編號,直接回車---- echo select vol !NumVolESP!>%temp%\DiskPart.txt echo assign letter=!LabelEFI!>>%temp%\DiskPart.txt echo exit>>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt ) ::UEFI引導需要PE源盤安裝硬盤PE,默認需要本PE源盤，MBR引導,默認也要 set bCopyPE=y set /p bCopyPE=請問是否需要復制PE文件,默認需要，不需要輸入小寫n---- if not !bCopyPE!==n ( set name_PE=PE_MBY set /p name_PE=默認安裝PE于!LabelEFI!:\PE_MBY目錄，也可輸入目錄名字，如PE_WYS---- if not exist !LabelEFI!:\!name_PE!\ md !LabelEFI!:\!name_PE!\ set name_PathSdi=!name_PE! set name_PathWim=!name_PE! set bHvLSr=n for /l %%i in (1,1,5) do ( if !bHvLSr!==n ( set /p LPartU=請輸入PE源文件所在盤盤符，可以是本地硬盤，不帶冒號---- if not exist !LPartU!: echo 這個盤符根本就沒有使用了，你不要搞笑好吧 if exist !LPartU!: set bHvLSr=y ) ) echo. dir !LPartU!:\*.sdi /b /s >%temp%\fdSeek.txt echo 查找到!LPartU!分區下所有映像引導文件*.sdi如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fdSeek.txt) do ( set /a a+=1&&echo 系統引導文件：!a! %%i) set /a CountWim=!a! if !a!==0 echo 該分區無PE系統映像引導文件,退出重來吧！&&goto End echo ----------------------------------------------------- set /p NumSdi=請輸入系統映像引導文件序號，我不檢測無效序號，默認1---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumSdi!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效PE系統映像文件序號,退出重來吧！&&goto End echo. dir !LPartU!:\*.wim /b /s >%temp%\fwSeek.txt echo 查找到!LPartU!分區下所有映像文件如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fwSeek.txt) do ( set /a a+=1&&echo PE系統映像：!a! %%i) set /a CountWim=!a! if !a!==0 echo 該分區無PE系統映像文件,退出重來吧！&&goto End echo ----------------------------------------------------- set /p NumWimSource=請輸入PE系統映像文件序號，我不檢測無效序號，默認1---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumWimSource!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效PE系統映像文件序號,退出重來吧！&&goto End set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fdSeek.txt) do ( set /a a+=1 if !a!==!NumSdi! copy /y %%i !LabelEFI!:\!name_PE!\boot.sdi ) set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fwSeek.txt) do ( set /a a+=1 if !a!==!NumWimSource! copy /y %%i !LabelEFI!:\!name_PE!\boot.wim ) ) if !bIsUEFI!==n ( set bCopyBoot=n set /p bCopyBoot=是否需要從PE源盤復制MBR啟動環境文件,默認不，需要輸入小寫y---- if not !bCopyBoot!==n ( set bHvLSr=n for /l %%i in (1,1,5) do ( if !bHvLSr!==n ( set /p LPartPE=請輸入PE源盤盤符，然后回車---- if not exist !LPartPE!: echo 這個盤符根本就沒有使用了，你不要搞笑好吧 if exist !LPartPE!: set bHvLSr=y ) ) if not exist !LPartPE!:\boot\ ( echo 這個盤里沒有啟動環境文件，你不要搞笑好吧！&& goto End ) xcopy /h /y !LPartPE!:\bootmgr !LabelEFI!:\ if exist !LabelEFI!:\boot\ rd /s /q !LabelEFI!:\boot\ if not exist !LabelEFI!:\boot\ md !LabelEFI!:\boot\ robocopy !LPartPE!:\boot\ !LabelEFI!:\boot\ /e /xf bcd ) ) set bbPE=y set /p bbPE=請問是否建PE菜單項,默認建，如果不建輸入小寫n---- if not !bbPE!==n ( if !bCopyPE!==n ( ::沒有復制源文件，說明ESP/MSR分區中已經存在PE源文件，查找相應路徑 echo. dir !LabelEFI!:\*.sdi /b /s >%temp%\fdSeek.txt echo 查找到!LabelEFI!分區下所有映像引導文件*.sdi如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fdSeek.txt) do ( set /a a+=1&&echo 系統引導文件：!a! %%i ) set /a CountWim=!a! if !a!==0 echo 該分區無PE系統映像引導文件,退出重來吧！&&goto End echo ----------------------------------------------------- set /p NumSdi=請輸入系統映像引導文件序號，我不檢測無效序號，默認1---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumSdi!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效PE系統映像文件序號,退出重來吧！&&goto End set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fdSeek.txt) do ( set /a a+=1 if !a!==!NumSdi! ( set namePathSdi=%%i set name_PathSdi=!namePathSdi:~3,-9! ) ) echo 引導文件路徑是：!name_PathSdi! set /p name_PathSdi=如果路徑有誤，請手工輸入，默認不需要，直接回車---- echo. dir !LabelEFI!:\*.wim /b /s >%temp%\fwSeek.txt echo 查找到!LabelEFI!分區下所有PE映像文件如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fwSeek.txt) do ( set /a a+=1&&echo PE系統映像：!a! %%i) set /a CountWim=!a! if !a!==0 echo 該分區無PE系統映像文件,退出重來吧！&&goto End echo ----------------------------------------------------- set /p NumWimSource=請輸入PE系統映像文件序號，我不檢測無效序號，默認1---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumWimSource!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效PE系統映像文件序號,退出重來吧！&&goto End set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fwSeek.txt) do ( set /a a+=1 if !a!==!NumWimSource! ( set namePathWim=%%i set name_PathWim=!namePathWim:~3,-9! ) ) echo PE系統文件路徑是：!name_PathWim! set /p name_PathWim=如果路徑有誤，請手工輸入，默認不需要，直接回車---- ) set name_MenuPE=PE_MBY set /p name_MenuPE=輸入菜單項名字,默認PE_MBY，可自行輸入，如MAXDOS_WYS---- echo list vol>%temp%\DiskPart.txt echo exit>>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt set /p NumVolESP=請輸入GPT中ESP分區或MBR中MSR分區的卷編號,直接回車---- bcdedit /create {bootmgr} /d "Marc Boot Manager" >nul 2>nul bcdedit /set {bootmgr} device partition=\device\harddiskvolume!NumVolESP! >nul 2>nul ::創建設備項 bcdedit /create /d "!name_MenuPE!" /device>%~dp0fdid.txt ::取得所生成的設備標識符 for /f "tokens=2 delims= " %%i in (%~dp0fdid.txt) do (set fdid=%%i) ::設置設備所在分區 bcdedit /set !fdid! ramdisksdidevice partition=!LabelEFI!: ::設置設備所在的固定路徑 bcdedit /set !fdid! ramdisksdipath \!name_PathSdi!\boot.sdi ::創建菜單項 bcdedit /create /d "!name_MenuPE!" /application osloader>%~dp0fmid.txt ::取得所生成的菜單標識符 for /f "tokens=2 delims= " %%i in (%~dp0fmid.txt) do (set fmid=%%i) ::設置啟動設備 bcdedit /set !fmid! device ramdisk=[!LabelEFI!:]\!name_PathWim!\boot.wim,!fdid! ::設置系統設備 bcdedit /set !fmid! osdevice ramdisk=[!LabelEFI!:]\!name_PathWim!\boot.wim,!fdid! ::設定啟動程序（winload）的路徑 if not !bIsUEFI!==n bcdedit /set !fmid! path \windows\system32\winload.efi if !bIsUEFI!==n bcdedit /set !fmid! path \windows\system32\winload.exe ::設置系統根目錄 bcdedit /set !fmid! systemroot \windows ::開啟detecthal支持 bcdedit /set !fmid! detecthal yes ::開啟WinPE支持 bcdedit /set !fmid! winpe yes ::設置nx為optin bcdedit /set !fmid! nx optin ::設置為最后一項顯示 bcdedit /displayorder !fmid! /addlast bcdedit /timeout 2 bcdedit /enum ) del /f /s /q %~dp0fdid.txt>nul 2>nul del /f /s /q %~dp0fmid.txt>nul 2>nul goto End ) if !OpChoice!==13 ( echo. echo 1：本批處理、驅動和補丁子目錄、IE升級包必需都在當前目錄。 echo 在同目錄中有\(zhòng)Driver、\patch和\IE固定目錄，放置驅動和補丁子目錄。 echo 如\Driver\Drv_Win8_x64，\patch\patch_Win8_x64 echo 調整Win7、Win8功能，可能還要準備Win8原版光盤，或者IE10安裝包。 echo. echo 2：當前目錄下工作子目錄，掛載文件夾\Mount，臨時文件夾\tmp_Imgex。 echo 臨時文件*.txt都在系統臨時文件夾%temp%中。 echo. pause ::準備全局變量 set /a a=0 set /a CountWim=0 set /a CountIndex=0 set /a NumWimSource=0 set /a IndexSource=0 ::準備局部變量 set /a CountPatch=0 set /a NumPatch=0 set /a CountDrv=0 set /a NumDrv=0 set /a CountIE=0 set /a NumIE=0 cls echo. set bPatDism=y set /p bPatDism=請問是否封裝系統補??？默認是y，直接回車/不是輸入小寫n---- set bDrvDism=y set /p bDrvDism=請問是否封裝硬件驅動？默認是y，直接回車/不是輸入小寫n---- set bIsWin8=y set /p bIsWin8=請問是要操作Win8映像嗎？默認是y，直接回車/不是輸入小寫n---- if not !bIsWin8!==n ( set bEnabNet3=y set /p bEnabNet3=請問是否啟用 .Net 3.5/2支持？默認是y，直接回車/不是輸入小寫n---- if not !bEnabNet3!==n ( set /p LabelISO=請插入光盤或者裝載ISO，并準確輸入盤符！---- ) ) if !bIsWin8!==n ( set bDisabFun=y set /p bDisabFun=請問是否關閉Win7部分功能？默認是y，直接回車/不是輸入小寫n---- set bDismIE10=y set /p bDismIE10=請問是否封裝IE10？默認是y，直接回車/不是輸入小寫n---- ) ::準備源系統映像文件與索引序號。 set bHvLSr=n for /l %%i in (1,1,5) do ( if !bHvLSr!==n ( set /p LPartSource=請輸入系統映像文件所在盤，不帶冒號---- if not exist !LPartSource!: echo 這個盤符根本就沒有使用了，你不要搞笑好吧 if exist !LPartSource!: set bHvLSr=y ) ) dir !LPartSource!:\*.wim /b /s >%temp%\fSeek.txt echo 查找到!LPartSource!分區下所有映像文件如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1&&echo 系統映像：!a! %%i) set /a CountWim=!a! if !a!==0 echo 該分區無系統映像文件,退出重來吧！&&goto End ::準備臨時文件夾\tmp_Imagex，預備以后作為ScratchDir使用，這段代碼不能隨意移動位置！ ::目的是1：在PE中臨時文件空間不足，源文件盤空間一般沒問題；2：如果源文件在固態盤，要充分固態盤速度優勢。 if not exist !LPartSource!:\tmp_Imagex md !LPartSource!:\tmp_Imagex if exist !LPartSource!:\tmp_Imagex rd /s /q !LPartSource!:\tmp_Imagex&&md !LPartSource!:\tmp_Imagex ::準備局部文件夾\mount if not exist !LPartSource!:\mount md !LPartSource!:\mount if exist !LPartSource!:\mount ( :rd dir !LPartSource!:\mount /ad /b /s >%temp%\del_rd.txt for /f "usebackq delims=" %%i in (%temp%\del_rd.txt) do ((takeown /f "%%i" /r /d y >%temp%\del_log.txt>nul 2>nul)&(@echo y|icacls "%%i" /t /q /grant administrator:f>nul 2>nul )&(rd "%%i" /s /q>nul 2>nul)) takeown /f !LPartSource!:\mount /r /d y >%temp%\del_log.txt>nul 2>nul @echo y|icacls !LPartSource!:\mount /t /q /grant administrator:f>nul 2>nul rd !LPartSource!:\mount /s /q if exist !LPartSource!:\mount goto :rd del /f /s /q %temp%\del_log.txt>nul 2>nul del /f /s /q %temp%\del_rd.txt>nul 2>nul md !LPartSource!:\mount ) set /p NumWimSource=請輸入系統映像文件序號，我不檢測無效序號，不帶冒號---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumWimSource!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效系統映像文件序號,退出重來吧！&&goto End set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1 if !NumWimSource!==!a! Dism /get-imageinfo /imagefile:%%i ) set /p IndexSource=請輸入系統映像索引序號，我不檢測無效序號，不帶冒號---- if not !bPatDism!==n ( cls set /a a=0 dir %~dp0patch /d /b >%temp%\dirPatSeek.txt echo 查找到%~dp0patch目錄下所有子目錄，僅查子目錄 for /f "usebackq delims=" %%i in (%temp%\dirPatSeek.txt) do ( set /a a+=1 echo 所有子目錄：!a! %%i) set /a CountPatch=!a! if !CountPatch!==0 echo 無任何patch子目錄&&set bPatDism=n echo ----------------------------------------------------- if not !CountPatch!==0 ( set /p NumPatch=請輸入patch子目錄序號，不帶冒號---- set bVldPat=n for /l %%i in (1,1,!CountPatch!) do ( if !NumPatch!==%%i set bVldPat=y ) if !bVldPat!==n echo 你沒有輸入有效patch子目錄序號,退出重來吧！&&goto End ) ) if not !bDrvDism!==n ( cls set /a a=0 dir %~dp0Driver /d /b >%temp%\dirDrvSeek.txt echo 查找到%~dp0Driver目錄下所有子目錄，僅查子目錄 for /f "usebackq delims=" %%i in (%temp%\dirDrvSeek.txt) do ( set /a a+=1 echo 所有子目錄：!a! %%i) set /a CountDrv=!a! if !CountDrv!==0 echo 無任何Driver子目錄&&set bDrvDism=n echo ----------------------------------------------------- if not !CountDrv!==0 ( set /p NumDrv=請輸入patch子目錄序號，不帶冒號---- set bVldDrv=n for /l %%i in (1,1,!CountDrv!) do ( if !NumDrv!==%%i set bVldDrv=y ) if !bVldDrv!==n echo 你沒有輸入有效Driver子目錄序號,退出重來吧！&&goto End ) ) if !bIsWin8!==n ( if not !bDismIE10!==n ( echo IE10升級包在當前目錄子目錄IE下！ set /a a=0 dir %~dp0IE /d /b >%temp%\dirIESeek.txt echo 查找到%~dp0IE目錄下所有子目錄，僅查子目錄 for /f "usebackq delims=" %%i in (%temp%\dirIESeek.txt) do ( set /a a+=1 echo 所有子目錄：!a! %%i) set /a CountIE=!a! if !CountIE!==0 echo 無任何IE子目錄&&set bDismIE10=n echo ----------------------------------------------------- if not !CountIE!==0 ( set /p NumIE=請輸入IE子目錄序號，不帶冒號---- set bVldIE=n for /l %%i in (1,1,!CountIE!) do ( if !NumIE!==%%i set bVldIE=y ) if !bVldIE!==n echo 你沒有輸入有效IE子目錄序號,退出重來吧！&&goto End ) ) ) set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1 if !NumWimSource!==!a! dism /mount-image /imagefile:"%%i" /index:!IndexSource! /mountdir:!LPartSource!:\mount /Scratchdir:!LPartSource!:\tmp_Imagex ) if not !bPatDism!==n ( set /a a=0 for /f "usebackq delims=" %%i in (%temp%\dirPatSeek.txt) do ( set /a a+=1 if !NumPatch!==!a! dir "%~dp0patch\%%i" /b /s >%temp%\fPatSeek.txt ) for /f "usebackq delims=" %%j in (%temp%\fPatSeek.txt) do ( dism /image:!LPartSource!:\mount /add-package /packagepath:%%j /Scratchdir:!LPartSource!:\tmp_Imagex ) ) if not !bDrvDism!==n ( set /a a=0 for /f "usebackq delims=" %%i in (%temp%\dirDrvSeek.txt) do ( set /a a+=1 if !NumDrv!==!a! dism /image:!LPartSource!:\mount /add-driver /driver:"%~dp0Driver\%%i" /recurse /forceunsigned /Scratchdir:!LPartSource!:\tmp_Imagex ) ) if not !bIsWin8!==n ( if not !bEnabNet3!==n ( dism /image:!LPartSource!:\mount /enable-Feature /FeatureName:netfx3 /Source:!LabelISO!:\sources\sxs /Scratchdir:!LPartSource!:\tmp_Imagex ) ) if !bIsWin8!==n ( if not !bDisabFun!==n ( echo 調整功能獨立操作，以增強批處理兼容性，連Win7 Starter都可以用。 dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:TabletPCOC dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:WindowsGadgetPlatform dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:MediaCenter dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:FaxServicesClientPackage dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:Printing-XPSServices-Features dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:Xps-Foundation-Xps-Viewer dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:Printing-Foundation-InternetPrinting-Client dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:Hearts dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:Solitaire dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:SpiderSolitaire dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:FreeCell dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:Minesweeper dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:PurblePlace dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:Chess dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:Shanghai dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:InboxGames dism /Image:!LPartSource!:\mount /Disable-Feature /Scratchdir:!LPartSource!:\tmp_Imagex /FeatureName:OpticalMediaDisc ) if not !bDismIE10!==n ( set /a a=0 for /f "usebackq delims=" %%i in (%temp%\dirIESeek.txt) do ( set /a a+=1 if !NumIE!==!a! ( dism /image:!LPartSource!:\mount /add-package /packagepath:%~dp0ie\%%i\ie-win7.cab /packagepath:%~dp0ie\%%i\ielangpack-CHS.CAB /Scratchdir:!LPartSource!:\tmp_Imagex dism /image:!LPartSource!:\mount /add-package /packagepath:%~dp0ie\%%i\IE-Hyphenation-NEU.msu /packagepath:%~dp0ie\%%i\IE-Spelling-NEU.msu /Scratchdir:!LPartSource!:\tmp_Imagex ) ) ) ) set /p bCommit=請問是否保存映像修改，默認是y，直接回車/不保存輸入小寫n---- if not !bCommit!==n ( dism /unmount-image /mountdir:!LPartSource!:\mount /commit /Scratchdir:!LPartSource!:\tmp_Imagex ) if !bCommit!==n ( dism /unmount-image /mountdir:!LPartSource!:\mount /discard /Scratchdir:!LPartSource!:\tmp_Imagex ) rd /s /q !LPartSource!:\tmp_Imagex rd /s /q !LPartSource!:\mount goto End ) if !OpChoice!==14 ( echo 查找同目錄（及子目錄）下自動應答文件，如果一個都沒有，那就不要試了。 echo 本工具包提供的自動應答文件分64位和32位兩種，通用版僅僅實現跳過oobe過程。 set /a NumUntitled=0 set /a a=0 set NameUntitled=null dir %~dp0*.xml /b /s >%~dp0fAppUntitled.txt echo 查找到%~dp0目錄下所有自動應答文件如下表 echo ----------------------------------------------------- for /f "usebackq delims=" %%i in (%~dp0fAppUntitled.txt) do ( set /a a+=1&&echo 應答文件：!a! %%i) if !a!==0 echo 根本就沒有一個自動應答文件，那封裝也沒什么意思了，準備退出！&&goto End echo. set /p NumUntitled=請認真選擇應答文件序號，不帶冒號---- set /a a=0 for /f "usebackq delims=" %%i in (%~dp0fAppUntitled.txt) do ( set /a a+=1 if !NumUntitled!==!a! echo 你選擇的應答文件是：%%i ) set bGoSysprep=y set /p bGoSysprep=最后請確認現在可以開始封裝了嗎？默認是，直接回車，如果算了，請輸入小寫n---- if not !bGoSysprep!==n ( echo 正在幫您清除系統垃圾文件，請稍等...... ::刪除補丁備份目錄 rd %windir%\$hf_mig$ /Q /S ::刪除系統盤Office安裝臨時文件 rd /s /q %systemdrive%\msocache dir /ad /b /s %windir%\$NtUninstall* >%~dp0Del_rd.txt dir /ad /b /s %windir%\SoftwareDistribution\Download>>%~dp0Del_rd.txt for /f %%i in (%~dp0Del_rd.txt ) do ( rd "%%i" /s /q ) del %~dp0Del_rd.txt /f /q ::刪除補丁安裝記錄內容（下面的del /f /s /q %systemdrive%\*.log已經包含刪除此類文件） del %windir%\KB*.log /f /q ::刪除系統盤目錄下臨時文件 del /f /s /q %windir%\*.tmp ::刪除系統盤目錄下臨時文件 del /f /s /q %windir%\*._mp ::刪除系統盤目錄下日志文件 del /f /s /q %windir%\*.log ::刪除系統盤目錄下GID文件 del /f /s /q %windir%\*.gid ::刪除系統目錄下scandisk（磁盤掃描）留下的無用文件 del /f /s /q %windir%\*.chk ::刪除系統目錄下old文件 del /f /s /q %windir%\*.old ::刪除回收站的無用文件 del /f /s /q %windir%\recycled\*.* ::刪除系統目錄下備份文件 del /f /s /q %windir%\*.bak ::刪除系統維護等操作產生的臨時文件 rd /s /q %windir%\temp md %windir%\temp ::刪除當前用戶的COOKIE（IE） del /f /q %userprofile%\cookies\*.* ::刪除internet臨時文件 del /f /s /q "%userprofile%\local settings\temporary internet files\*.*" ::刪除當前用戶日常操作臨時文件 del /f /s /q "%userprofile%\local settings\temp\*.*" copy %systemdrive%\Users\%username%\Favorites\*.* %systemdrive%\Users\Default\Favorites dir %~dp0Desk*.bat /b /s >%~dp0fTmp.txt dir %~dp0Driver*.bat /b /s >>%~dp0fTmp.txt for /f %%i in (%~dp0fTmp.txt) do ( copy %%i %windir%\system32 ) set /a a=0 for /f "usebackq delims=" %%i in (%~dp0fAppUntitled.txt) do ( set /a a+=1 if !a!==!NumUntitled! %windir%\system32\sysprep\sysprep.exe /oobe /generalize /shutdown /unattend:%%i ) ) goto End ) if !OpChoice!==15 ( set bIsUEFI=y set /p bIsUEFI=請問BIOS是否UEFI,默認是，不是請輸入小寫n---- set bHvLab=n set /p bHvLab=采用MBR但無MSR，或者M(jìn)BR中MSR分區/ESP分區如已有盤符，輸入y,其余直接回車---- if !bHvLab!==y ( set /p LabelEFI=請輸入ESP分區或MBR中MSR分區盤符或者M(jìn)BR無MSR分區時的系統盤符---- ) if not !bHvLab!==y ( ::給EFI或者M(jìn)SR分區分配盤符 set bHvSetESP=n for %%i in (z y x w v u t s r q p o n m) do ( if !bHvSetESP!==n ( if not exist %%i: set LabelEFI=%%i&&set bHvSetESP=y ) ) echo list vol>%temp%\DiskPart.txt echo exit>>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt set /p NumVolESP=請輸入GPT中ESP分區或MBR中MSR分區的卷編號,直接回車---- echo select vol !NumVolESP!>%temp%\DiskPart.txt echo assign letter=!LabelEFI!>>%temp%\DiskPart.txt echo exit>>%temp%\DiskPart.txt diskpart /s %temp%\DiskPart.txt ) bcdedit /create {bootmgr} /d "Marc Boot Manager" >nul 2>nul bcdedit /set {bootmgr} device partition=\device\harddiskvolume!NumVolESP! >nul 2>nul set b8Boot=n set /p b8Boot=請問是否建8.1/8/7引導,默認不，如果要建輸入小寫y---- if !b8Boot!==y ( ::創建8.1/8/7引導項 set l_Sys8=null set /p l_Sys8=請問要為哪個盤的Windows 8.1/8/7建立引導，輸入盤符---- set name_MenuWindows=Windows_8.1/8/7 set /p name_MenuWindows=默認菜單項名字Windows_8.1/8/7，可自行輸入不帶空格名字，如Windows_7---- bcdedit /create /d "!name_MenuWindows!" /application osloader>%temp%\fmid.txt for /f "tokens=2 delims= " %%i in (%temp%\fmid.txt) do (set fmid=%%i) bcdedit /set !fmid! device partition=!l_Sys8!: if not !bIsUEFI!==n bcdedit /set !fmid! path \windows\system32\winload.efi if !bIsUEFI!==n bcdedit /set !fmid! path \windows\system32\winload.exe bcdedit /set !fmid! osdevice partition=!l_Sys8!: bcdedit /set !fmid! systemroot \windows bcdedit /displayorder !fmid! /addlast ) set b8VhdBoot=n set /p b8VhdBoot=請問是否建8.1/8/7 VHD引導,默認不，如果要建輸入小寫y---- if !b8VhdBoot!==y ( ::創建8.1/8/7 VHD引導項 set namePathVhd=null ::準備VHD系統文件與序號。 set bHvLSr=n for /l %%i in (1,1,5) do ( if !bHvLSr!==n ( set /p LPartSource=請輸入VHD系統文件所在盤，不帶冒號---- if not exist !LPartSource!: echo 這個盤符根本就沒有使用了，你不要搞笑好吧 if exist !LPartSource!: set bHvLSr=y ) ) dir !LPartSource!:\*.vhd /b /s >%temp%\fSeek.txt echo 查找到!LPartSource!分區下所有VHD文件如下表 echo ----------------------------------------------------- set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1&&echo 系統映像：!a! %%i) set /a CountWim=!a! if !a!==0 echo 該分區無系統VHD文件,退出重來吧！&&goto End set NumWimSource=1 set /p NumWimSource=請輸入VHD系統文件序號，我不檢測無效序號，默認1---- set bVldNSr=n for /l %%i in (1,1,!CountWim!) do ( if !NumWimSource!==%%i set bVldNSr=y ) if !bVldNSr!==n echo 你沒有輸入有效VHD系統文件序號,退出重來吧！&&goto End set /a a=0 for /f "usebackq delims=" %%i in (%temp%\fSeek.txt) do ( set /a a+=1 if !a!==!NumWimSource! ( set nameTmp=%%i echo 你選擇的VHD系統文件是：%%i ) ) set namePathVhd=!nameTmp:~3! set name_MenuVHD=VHD_MBY set /p name_MenuVHD=輸入菜單項名字,默認VHD_MBY，可自行輸入，如MAXDOS_WYS---- bcdedit /create /d "!name_MenuVHD!" /application osloader>%temp%\fmid.txt for /f "tokens=2 delims= " %%i in (%temp%\fmid.txt) do (set fmid=%%i) bcdedit /set !fmid! device vhd=[!LPartSource!:]\!namePathVhd! if not !bIsUEFI!==n bcdedit /set !fmid! path \windows\system32\winload.efi if !bIsUEFI!==n bcdedit /set !fmid! path \windows\system32\winload.exe bcdedit /set !fmid! osdevice vhd=[!LPartSource!:]\!namePathVhd! bcdedit /set !fmid! systemroot \windows bcdedit /set !fmid! detecthal yes bcdedit /displayorder !fmid! /addlast ) if !bIsUEFI!==n ( set bXP=n set /p bXP=請問是否建XP引導,默認不，如果要建輸入小寫y---- if !bXP!==y ( ::創建XP引導項 set l_SysXP=null set /p l_SysXP=請問要為哪個盤的XP建立引導，輸入盤符---- set name_MenuXP=XP_MBY set /p name_MenuXP=輸入菜單項名字,默認XP_MBY，可自行輸入，如MAXDOS_WYS---- bcdedit /create {ntldr} /d "!name_MenuXP!" bcdedit /set {ntldr} device partition=!l_SysXP!: bcdedit /set {ntldr} path \ntldr bcdedit /displayorder {ntldr} /addlast ) ) goto End ) if !OpChoice!==16 ( echo. bcdedit /enum /v >%temp%\x.txt ::取得GUID所在行。 set numOrder=null set /a a=0 for /f "delims= " %%i in ( %temp%\x.txt ) do ( set /a a+=1 if %%i==displayorder set numOrder=!a! ) find "description" %temp%\x.txt >%temp%\m.txt set /a a=0 for /f "skip=3 tokens=1,* delims= " %%i in ( %temp%\m.txt ) do ( set bDel=n set /a Tmp=!a!+1 set /p bDel=系統啟動菜單第!Tmp!項是:%%j，請問是否刪除，默認不刪，刪除輸入y---- set /a numItem=!a!+!numOrder! if not !bDel!==n ( set /a c=0 for /f "tokens=1,* delims= " %%k in ( %temp%\x.txt ) do ( set /a c+=1 if !c!==!numItem! ( if !numItem!==!numOrder! ( set item=%%l bcdedit /delete %%l >nul 2>nul bcdedit /delete %%l /f >nul 2>nul ) if not !numItem!==!numOrder! ( set item=%%k bcdedit /delete %%k >nul 2>nul bcdedit /delete %%k /f >nul 2>nul ) ) ) ) set /a a+=1 ) del /f /s /q %temp%\x.txt>nul 2>nul del /f /s /q %temp%\m.txt>nul 2>nul bcdedit /enum echo. goto End ) :End set bProceed=n set /p bProceed=請問繼續其它任務嗎，重復運行默認應答選項有效，默認不n，直接回車/是輸入小寫y---- if !bProceed!==y goto op del /f /s /q %temp%\fSeek.txt>nul 2>nul del /f /s /q %temp%\fSrSeek.txt>nul 2>nul del /f /s /q %temp%\fDsSeek.txt>nul 2>nul del /f /s /q %temp%\dirPatSeek.txt>nul 2>nul del /f /s /q %temp%\dirDrvSeek.txt>nul 2>nul del /f /s /q %temp%\dirIESeek.txt>nul 2>nul del /f /s /q %temp%\fPatSeek.txt>nul 2>nul del /f /s /q %temp%\ImageInfo.txt>nul 2>nul del /f /s /q %temp%\DiskPart.txt>nul 2>nul del /f /s /q %temp%\tmp.txt>nul 2>nul del /f /s /q %~dp0fAppUntitled.txt>nul 2>nul del /f /s /q %~dp0fTmp.txt>nul 2>nul del /f /s /q %~dp0null>nul 2>nul del /f /s /q %temp%\Out_DiskPart.txt>nul 2>nul del /f /s /q %temp%\Out_tmp.txt>nul 2>nul del /f /s /q %temp%\tmp.txt>nul 2>nul del /f /s /q %~dp0fdid.txt>nul 2>nul del /f /s /q %~dp0fmid.txt>nul 2>nul echo 任務結束時間是%time:~,2%點%time:~3,2%分%time:~6,2%秒 set "T2=%time%" if "%T2:~,2%" lss "%T1:~,2%" （set Tday+=8640000） set /a "T_d=%Tday%+(%T2:~,2%*360000)+(%T2:~3,1%*60000+%T2:~4,1%*6000)+(%T2:~6,1%*1000+%T2:~7,1%*100)+(%T2:~9,1%*10+%T2:~-1%)-(%T1:~,2%*360000)-(%T1:~3,1%*60000+%T1:~4,1%*6000)-(%T1:~6,1%*1000+%T1:~7,1%*100)-(%T1:~9,1%*10+%T1:~-1%)" set /a "ss=%T_d%/100%%60" set /a "mm=%T_d%/6000%%60" set /a "hh=%T_d%/360000%%1" set /a "ms=%T_d%%%100" echo 本次任務消耗時間為 %hh%:%mm%:%ss%.%ms%秒 pause |
|
|
