下面的代碼是一段設置 iptable 的腳本，copy 下來，存為一個腳本文件，修改可以執行，再執行一下
Code:
echo 1 >/proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
echo 0 >/proc/sys/net/ipv4/conf/all/accept_source_route
echo 0 >/proc/sys/net/ipv4/conf/all/accept_redirects
echo 1 >/proc/sys/net/ipv4/icmp_ignore_bogus_error_responses
echo 1 >/proc/sys/net/ipv4/conf/all/log_martians
iptables -F
iptables -X
iptables -Z
#iptables -A INPUT -i eth0 -s 10.0.0.0/8 -j DROP
#iptables -A INPUT -i eth0 -s 192.168.0.0/16 -j DROP
##
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
## Loopback
iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT
## SYN-Flooding
iptables -N syn-flood
iptables -A INPUT -i eth0 -p tcp --syn -j syn-flood
iptables -A syn-flood -m limit --limit 30/s --limit-burst 4 -j RETURN
iptables -A syn-flood -j DROP
## Make sure that new TCP connections are SYN packets
iptables -A INPUT -i eth0 -p tcp ! --syn -m state --state NEW -j DROP
## HTTP
iptables -A INPUT -i eth0 -p tcp -d 0/0 --dport 80 -j ACCEPT
## CVS
iptables -A INPUT -i eth0 -p tcp -d 0/0 --dport 2401 -j ACCEPT
## IP packets limit
iptables -A INPUT -f -m limit --limit 100/s --limit-burst 5 -j ACCEPT
# LOG --log-level INFO --log-prefix "IPT INPUT packet died: "
iptables -A INPUT -p icmp -m limit --limit 1/s --limit-burst 3 -j ACCEPT
## FTP service
iptables -A INPUT -i eth0 -p tcp --dport 21 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 20 -j ACCEPT
iptables -A INPUT -p tcp --dport 30001:50000 -j ACCEPT
## SSH login
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 22 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 22 -j DROP
## Anything else not allowed
iptables -A INPUT -i eth0 -j DROP
上面是打開了 www / ftp / ssh2 / cvs 服務，如果你不想打開，請刪除相應項
限制一個 ip 不能同時有 30 以上訪問
